EXPLORE OUR PRODUCTS
ASK FOR A CATALOGUE
VECO ITALIA COMPLETE in PDF format
Instructions for use
VECOSOL FR/AN is compatible with all Vecosol product range and with other anionic and non ionic products.
VECOSOL FR/AN can be applied with roller coating or spraying machines alone or in finishing mixtures (also pigmented and/or coloured) to enhance sealing and fullness on defective full grain and buffed leathers.
After drying, it is necessary to iron or embossy above 120 -130 °C temperature to develop its great sealing action in order to obtain a strong volume increase of the finishing film with a waxy, slightly blocked touch and a matt aspect.
Afterwards it is possible to buff the leather with thin paper and proceed with the finishing.
Levelling and adhesion of the product and of the following finishing coatings are good.
Example of application:
VECOSOL BINDER U 410 SN |
331 |
VECOSOL FR/AN | 139 |
VECOSOL PRINTEX NERO | 88,3 |
WATER | 441,7 |
Spray this mix on the leather, dry and embossy to 120° - 130 °C at 40 – 50 atm.
Performance
Line | VECOSOL |
Appearance | Whitish viscous liquid |
Type | Water based polyurethane autoexpanding anionic compound |
Dry content | 24 ± 0.5% |
pH 1 : 10 | 8.5 ± 0.5 |
Fastness to light | Good |
Storage | From 5°C to 35°C – Keep from freezing |
Storage guarantee | 6 months |
Risks identification | Not dangerous |